The users of Guangdong plastic granulator and recycled plastic granulator must regularly add appropriate amount of lubricating oil, which can greatly reduce the appearance of friction and effectively prolong its service life.
The plastic regenerator has been used for a long time. People must do a good job in the inspection of the fasteners of the granulator to see if there is any sign of abnormal lake comprehensive loosening. If these problems cannot be solved in a timely manner, various problems are likely to occur during the use of the granulator, which will also affect the normal operation of the granulator.
Before using the plastic recycling machine, people must actively carry out relevant inspections on such production equipment. This is a problem that needs to be highly valued by people. Only through inspection can we know whether the production pen is loose, aging, corrosion and other conditions. For these existing problems, people must solve them in a timely manner. Only by ensuring that there is no abnormality can they be used.
After the above inspection, the recycled plastic granulator starts to run without load: the control box circuit is switched on and powered on, the lubricating oil pump is started, the gearbox is lubricated for 3mm, and all lubricating parts are lubricated with lubricating oil. Check that there is no foreign matter in the hopper, and then move the V-belt again, which should rotate smoothly without blocking. Start the screw drive motor at low speed. Observe whether the pointer oscillation of voltmeter and ammeter is normal. Verify that the screw rotation is correct. The emergency stop button on the inspection and test equipment shall work accurately and reliably. Check whether the lubricating oil working pipeline is smooth, whether the injection position is correct, and whether each part has oil leakage. Check the cooling water pipeline for water supply and ensure there is no leakage. The above can be put into production normally.